Every fall, a large share of Minneapolis homeowners lock the front door, set the thermostat, and head south for the winter. Owning two homes in two very different climates brings real comfort. It also means at least one property sits empty for months at a time.
Vacant homes are where water damage and mold do their worst work. Nobody is around to hear a pipe burst, smell a musty basement, or notice a ceiling stain spreading. A minor problem that a homeowner would catch in an afternoon can run unchecked for weeks.
This guide covers how to prepare your Minneapolis home before you leave for the winter, how to protect your warm-weather property before you come back north, and what to do if you return to find damage.
Why Empty Homes Face Greater Risk
In an occupied home, leaks usually announce themselves quickly. Someone notices a wet floor, a dripping sound, or a spike in humidity. In a vacant home, a slow supply-line leak can saturate drywall, subfloor, and insulation long before anyone opens the door.
Time matters with water. According to the EPA, mold can begin growing on damp building materials within 24 to 48 hours. A leak that starts in January and goes unnoticed until April has months to spread through wall cavities and under flooring, turning a simple repair into a full restoration project.
Most homeowners insurance policies also include vacancy provisions. Some require that the home be checked regularly or that the water be shut off during extended absences. Review your policy before leaving so you understand what your coverage expects.
Preparing Your Minneapolis Home Before You Head South
Minnesota winters put plumbing under serious stress. Subzero cold snaps can freeze pipes in exterior walls, crawl spaces, and unheated additions, even in a well-built home. A few hours of preparation can prevent a costly surprise in spring.
- Keep the heat on. Set the thermostat to at least 55°F. Turning the furnace off or setting it too low leaves interior pipes exposed during cold snaps.
- Shut off the main water supply. Closing the main valve and draining the lines is the single most effective way to limit water damage while you’re away. If you need water running for a fire sprinkler system or a boiler, talk with a plumber about which lines can safely be isolated.
- Open cabinet doors on exterior walls. This lets warm air reach the pipes under kitchen and bathroom sinks.
- Disconnect garden hoses and drain outdoor spigots. Water trapped in a hose can freeze back into the sillcock and split the pipe inside the wall.
- Clean your gutters. Clogged gutters contribute to ice dams, which push meltwater under shingles and down into ceilings and wall cavities.
- Install smart leak and temperature sensors. Inexpensive Wi-Fi sensors placed near the water heater, washing machine, and sump pit can alert your phone the moment water or freezing temperatures appear.
Finally, ask a trusted neighbor, friend, or professional house-watching service to walk through the home every week or two. A set of eyes inside the house catches problems no sensor can.
Plan for the Spring Thaw
Many snowbirds return to Minneapolis in April or May, which means they’re still away during the March snowmelt. As the snowpack melts and the ground stays frozen or saturated, water has nowhere to go but toward your foundation.
Before leaving, test your sump pump by pouring a bucket of water into the pit and confirming it cycles on and off. A battery backup system adds protection if a late-winter storm knocks out power. Make sure downspouts extend several feet away from the foundation, and ask your house checker to look in the basement during the thaw.
Your Warm-Weather Home Needs a Different Plan
Once you return to Minnesota for the summer, the roles reverse. Your Florida condo or house sits empty through months of heat, humidity, and afternoon thunderstorms. Freezing pipes are no concern there, but moisture in the air is a serious one.
In a humid climate, your air conditioner works as the home’s primary dehumidifier. Shutting it off to save energy while you’re gone allows indoor humidity to climb, and mold can take hold on furniture, drywall, closets, and cabinetry. Many property managers in South Florida recommend setting the thermostat somewhere between 78°F and 82°F and keeping indoor humidity below 60 percent. A standalone dehumidifier or a thermostat with humidity control adds another layer of protection.
Air conditioning systems are also a common source of water damage in their own right. Condensate drain lines clog with algae and debris, and when they back up, water overflows the drain pan and soaks into ceilings, closets, and flooring. If your seasonal home is in Palm Beach County, scheduling a pre-departure tune-up with an AC company Boynton Beach homeowners rely on can catch a clogged drain line or a failing component before the house sits unattended for the summer.
Before you leave, also shut off the water supply to the washing machine and ice maker, and consider closing the main valve if your building allows it.
Signs of Water Damage or Mold When You Return
Whether you’re returning to Minneapolis in spring or to Florida in fall, walk through the home carefully before you settle in. Watch for:
- A musty or earthy odor, especially in basements, closets, and bathrooms
- Stains, discoloration, or bubbling paint on ceilings and walls
- Warped, cupped, or soft flooring
- Visible mold growth on drywall, baseboards, or furniture
- A water bill noticeably higher than your vacancy usage should produce
- Condensation on windows or a damp feel to the air
Some damage hides in places you can’t see. Water can travel inside wall cavities and under flooring well beyond the visible stain, which is why professionals use moisture meters and thermal imaging to map the full extent of a problem.
What to Do If You Find Damage
If you discover water damage or mold, act quickly. Every additional day gives moisture more time to spread and mold more time to grow.
- Stop the source. Shut off the main water valve if the leak is still active, and turn off electricity to affected areas if water is near outlets or appliances.
- Document everything. Take photos and video of the damage before moving anything. Your insurance adjuster will want a clear record.
- Contact your insurance company. Report the claim promptly and ask about any vacancy provisions in your policy.
- Call a restoration professional. Proper drying requires commercial-grade dehumidifiers, air movers, and moisture monitoring to make sure materials are dry all the way through, beyond what feels dry to the touch.
Avoid disturbing large areas of mold yourself. The EPA advises that mold covering more than about 10 square feet generally calls for professional remediation, and scrubbing or running fans over mold can spread spores to other parts of the home. Sewage backups also carry bacteria and should always be handled by trained technicians with proper protective equipment.
Protect Both Homes Before the Season Changes
Owning a seasonal home should feel like a reward. A little planning before each departure keeps it that way. In Minneapolis, the focus is keeping pipes warm and water out of the basement. In a humid southern climate, the focus is controlling moisture and keeping your cooling system in good working order.
If you come home to a wet basement, a burst pipe, or the first signs of mold, Bedrock Restoration provides water damage restoration, fire damage restoration, and mold remediation for Minneapolis homeowners, with IICRC-certified crews available around the clock to assess the damage and get your home back to normal.